Surge Protection
KEN-SG/TC Series Surge Protector for RJ45/RJ11

Requirement class to VDE 0675:D
Requirement class to EN61643-11: Type 3
Requirement class to IEC61643-1: Class III

Application Range:

KEN-SG series DIN rail surge protective devices are applied to the front side of computer network, telephone system, control system, etc, providing protection against overvoltage arising from lightning strike to the signal line and mis-operation.

Main Features:

1. Adopt 35mm standard DIN rail, convenient for installation and use.
2. Adopt multilayer protection technology, strong protection ability, high reliability.
3. Built-in 4mm² elevating terminal, strong wiring ability, more reliable grounding.
4. Small volume, exquisite, flexible and convenient combination, strong adaptability.

KEN-SG/RJ45-S

Surge ProtectorNominal operating voltage Un:3V
Max. continuous operating voltage Uc:5V
Voltage protection level Up (Line to line):<45V
Nominal discharge current In(8/20):100A
Transmission rate Vs:1000M

Surge ProtectorNominal operating voltage Un:8V
Max. continuous operating voltage Uc:8V
Voltage protection level Up (Line to line):<45V
Nominal discharge current In(8/20):2.5kA
Transmission rate Vs:1000M

KEN-SG/RJ45-K

Surge ProtectorNominal operating voltage Un:8V
Max. continuous operating voltage Uc:8V
Voltage protection level Up (Line to line):<45V
Nominal discharge current In(8/20):2.5kA
Transmission rate Vs:1000M

KEN-SG/RJ45-T

Surge ProtectorNominal operating voltage Un:8V
Max. continuous operating voltage Uc:8V
Voltage protection level Up (Line to line):<45V
Nominal discharge current In(8/20):2.5kA
Transmission rate Vs:100M

KEN-SG/RJ45-T24

Surge ProtectorNominal operating voltage Un:5V
Max. continuous operating voltage Uc:8V
Voltage protection level Up (Line to line):<45V
Nominal discharge current In(8/20):2.5kA
Transmission rate Vs:100M