Surge Protection
KEN-GR/ABC Series Integrated Surge Protector

Requirement class to VDE 0675:D
Requirement class to EN61643-11: Type 3
Requirement class to IEC61643-1: Class III

Application Range:

KEN-GR series triad Integrated surge protective devices are applied to surge protection of power, control signal, BNC video signal or RJ45 Ethernet. With characteristics of low voltage, quick response, etc, they can release and prevent the damage to the protected device arising from inductive surge from power and control wire or the other surge overvoltage. They are widely used in the field of security monitoring system, CCTV system, POE system, dataroom and so on.

Main Features:

1. Modularization, DIN rail design, convenient for installation and replacement.
2. Built-in temperature control and circuit breaking technology and multi-protection technology, strong protection ability, high reliability.
3. Green light on in notice window indicates power normal, off indicates broken, clear and easy distinguished.
4. Function of multi-protection: power, video signal, control signal and RJ45.
5. Built-in 4mm² elevating grounding terminal, more reliable grounding.

Protection Mode:

A: Surge arrester for Ac power Un:230VAc In:5kA Up<1.4kV
B: Surge arrester for BNC Un:12V In:5kA Up<80V (Video Signal)
C: Surge arrester for Control signal Un:12V In:5kA Up<80V
D: Surge arrester for Dc power Un:24/48VDc In:2.5kA Up<350V
E: Surge arrester for Ethernet (RJ45) Un:5V In:2.5kA Up<45V Vs:100/1000M

KEN-GR/ABC

Surge ProtectorA: Surge arrester for AC power Un:230VAc In:5kA Up<1.4kV
B: Surge arrester for BNC Un:12V In:5kA Up<80V (Video Signal)
C: Surge arrester for Control signal Un:12V In:5kA Up<80V

KEN-GR/CDE

Surge ProtectorC: Surge arrester for Control signal Un:12V In:5kA Up<80V
D: Surge arrester for Dc power Un:24VDc In:2.5kA Up<350V
E: Surge arrester for Ethernet (RJ45) Un:5V In:2.5kA Up<45V Vs:1000M

KEN-GR/POE

Surge ProtectorPower over Ethernet
D: Surge arrester for Dc power Un:48VDc In:2.5kA Up<350V
E: Surge arrester for Ethernet (RJ45) Un:5V In:2.5kA Up<45V 100